Sin Tace Kumfa Mai Rage Tsami na Silicon Carbide Sic Plate don Masana'antun da masu kaya na ƙarfe

Tace Kumfa Mai Rage Tsami na Silicon Carbide don Gyaran Karfe na Iron Hoton da aka Fito

Tace Kumfa Mai Rage Tsauri na Silicon Carbide Sic Plate don Gyare-gyaren ƙarfe

Takaitaccen Bayani:

Sunan samfurin:Matatar Kumfa ta Silicon carbide/SIC

Kayan aiki:Silicon Carbide

Launi:Launin toka

Yawan ramuka:10-60PPI

Rashin yarda:≤1500℃

Rarrabuwa:Kashi 80-90%

Ƙarfin matsi:1.0 MPa

Keɓance:Siffa/Girman

Aika mana imel

Cikakken Bayani game da Samfurin

Alamun Samfura

Bayanin Samfurin

Matatar yumbu ta silicon carbide ta amfani da soso mai kumfa polyurethane da aka shigo da shi daga Jamus a matsayin mai ɗaukar kaya, galibi ana matse silicon carbide a cikin soso mai kumfa, sannan a matse slurry ɗin, slurry ɗin da ke kewaye da zaren kumfa, bayan bushewa, gasa a babban zafin jiki, lalacewar thermal polyurethane, barin samfuran yumbu kumfa, wato matatar yumbu ta silicon carbide.

Matatar yumbu ta silicon carbide, tare da tsarin haɗin raga mai girma uku na soso mai kumfa, na iya sa ruwan ƙarfe ya nuna gyara, tantancewa na inji, kek ɗin tacewa, shawa da sauran hanyoyin tacewa don inganta tsarkin ruwan ƙarfe yadda ya kamata, rage yawan sharar gida, rage asarar sarrafa injina, don haka inganta ingancin samarwa da rage farashin samarwa. Matatar yumbu ta silicon carbide tana da ƙarfi mai yawa, kwanciyar hankali mai kyau, mafi girma fiye da saman da kuma daidaiton girma.

Bayani dalla-dalla Don Matatar Kumfa ta Silicon Carbide

Girma (mm)	Yawan zuba (kg/s)		Ƙarfin tacewa (tan)
Girma (mm)	Baƙin toka	Ductile Iron	Baƙin toka	Ductile Iron
404022	4	3	65	32
505022	6	4	100	52
755022	9	6	150	75
757522	14	9	220	100
1005022	12	8	200	100
1007522	18	12	300	150
10010022	25	16	400	200
15015022	50	36	900	450

Abubuwan Jiki da Sinadarai

Kayan Aiki	Silicon Carbide
Launi	Baƙi mai launin toka
Yawan ramuka	8-60ppi
Porosity	Kashi 80-90%
Rashin juriya	≤1500℃
Ƙarfin Lanƙwasawa	>0.8Mpa
Ƙarfin Matsi	>0.9Mpa
Nauyin girma	0.35-0.5 g/cm³
Juriyar girgizar zafi	Sau 6/1100℃
Aikace-aikace	Iron ɗin Ductile, Iron ɗin da za a iya amfani da shi wajen yin ƙarfe, da sauran Iron ɗin da za a iya yin amfani da shi wajen yin ƙarfe, da kuma sauran Iron ɗin da za a iya yin amfani da shi wajen yin ƙarfe.

Fasallolin Samfura

1. Tsarin: Tsarin hanyar sadarwa mai girma uku, gyarawa mai santsi da cikawa. Tsarin hanyar sadarwa mai girma uku na sama, tsakiya da ƙasa ba shi da ramuka da aka toshe, babu ramuka masu makafi, rage kwararar iska, kwararar laminar flocculation, da cikawa mai karko.

2. Tacewa: Tashar Labyrinth, ingantaccen toshewar slag na injiniya Akwai gibin ƙananan abubuwa, shaƙar slag mai ƙarfi, tacewa mai inganci, haɗakar oxide, slag da sauran manyan ƙazanta.

3. Aiki: Babban yanki na musamman na ciki na matatar. Tokar ta isa kuma ba tare da ramukan makafi ba, tana samar da cikakken tashar ƙarfafa ramuka masu girma uku, mai girma da yawa, tana shan ƙananan abubuwan da ke ciki.

Ka'idar Aiki

Ana iya sanya matatar yumbu ta kumfa a sassa daban-daban na tsarin zuba, kuma ya kamata a zaɓa bisa ga
halaye na sassan da yanayin samarwa, kusanci da simintin don cimma mafi kyawun tasirin tacewa. A aikace-aikace, bisa ga simintin gyare-gyare daban-daban da buƙatu, ana iya amfani da waɗannan hanyoyin:

(1) An sanya shi a cikin kofin zubar da harsashin mold: Ajiye teburin tacewa a wurin kofin zubar da harsashin mold, bayan an gasa harsashin mold, sanya matatar yumbu ta kumfa a wurin ƙofar, ko kuma a gasa matatar a dumama ta da harsashin mold kafin a zuba, wanda ke taimakawa ruwan ƙarfe ya fara wucewa, kuma tasirin amfani ya fi kyau. Domin a sauƙaƙa sanya matatar, ya zama dole a tsara tushen tacewa, wato, akwai tazara mai tsawon mm 2 tsakanin wurin tacewa da gefen waje na matatar a cikin harsashi, kuma saman tallafi ya kamata a bar shi da tushe mafi girma fiye da faɗin mm 5.

(2) Sanya matatar yumbu ta kumfa a ƙofar kayan yumbu na musamman a cikin kofin, yayin aikin yin harsashi,
Ana haɗa kofin zubawa da simintin, kuma ana sanya matatar a cikin kofin zubawa don zubawa.

(3) Sanya matatar yumbu mai kumfa a cikin tsarin zuba, yi harsashin tsarin zuba tare da matatar a gaba, sannan a ajiye rami a wurin da ya dace a kan harsashin don sauƙaƙe sanya matatar a cikin kujerar shigarwa. Ana sanya matakin yin harsashi a cikin kujera, an rufe shi da gilashin ruwa ko silica sol, kuma ana iya zuba shi a gwaji bayan an warke kuma an busar da shi.

Ayyuka na Tace Kumfa na Yumbu

● Tsaftace ruwan ƙarfe mai narkewa
● Tsarin ƙofar shiga mai sauƙi
● Inganta tsarin ƙarfe na simintin
● Rage rashin daidaiton simintin
● Inganta ingancin simintin
● Rage lahani na sake haɗakar iskar oxygen a cikin simintin
● Rage lahani a saman bayan an yi amfani da simintin