Tare da ƙaruwar buƙatar ingancin iska a cikin gida da kuma samun iska mai amfani da makamashi,musayar zafi na yumbu na saƙar zuma- wani kayan masana'antu na gargajiya masu zafi sosai - suna shiga tsarin iska mai tsabta. Tsarinsa na musamman mai ramuka, aiki mai kyau, da sake amfani da shi yana magance manyan matsalolin tsarin gargajiya, kamar tsadar maye gurbin matattara mai yawa da ɗan gajeren lokacin sabis, yana cimma ingantaccen magani da tattalin arziki na iska a cikin gida.
Mai sake samar da wutar lantarki ta yumbu mai canza zafi na zuma abu ne da ake amfani da shi sosai a fannin masana'antu, yana taka muhimmiyar rawa a tsarin iska mai tsabta. Tsarin musamman na jikin ajiyar zafi na yumbu mai zuma yana ba shi fa'idodi masu yawa a cikin iskar gas da ingancin musayar zafi. A ƙasa, za mu tattauna dalla-dalla yadda jikin ajiyar zafi na yumbu mai zuma ke shiga cikin aikin tsarin iska mai tsabta.
1. Halayen tsarin da kuma iskar gas da ke shiga
Tsarin ma'ajiyar dumamar yumbu na zuma ya ƙunshi ramuka masu siffar hexagonal ko murabba'i da yawa, waɗanda ke ba da hanyar wucewa ta "hanya" kamar ta ga ƙwayoyin iskar gas. Wannan tsari yana bawa ƙwayoyin iskar gas damar shiga ramuka ba tare da wata cikas ba, suna fara tafiya mai sauri. Ba kamar sauran kayan da ke da ƙananan sifofi masu rikitarwa ba, ramukan ma'ajiyar dumamar yumbu na zuma suna madaidaiciya kuma suna ci gaba, suna rage karo da cikas na ƙwayoyin iskar gas sosai yayin motsi.
2. Musayar zafi a cikin tsarin iska mai tsabta
A tsarin iska mai tsabta, ana amfani da ajiyar zafi na yumbu na zuma wajen musayar zafi. Lokacin da iskar gas mai zafi ta ratsa ta cikin na'urar sake dumama yumbu ta zuma, ana canja zafi zuwa ga jikin ajiyar zafi. Daga baya, lokacin da ake buƙatar dumama iska mai tsabta, ana sakin zafi da aka adana a cikin na'urar sake dumama zafi sannan a canza shi zuwa iska mai sanyi da ke gudana a akasin haka daga ramuka. A yayin wannan tsari, saurin shigar iskar gas yana ba da damar musayar zafi mai inganci, yana inganta amfani da makamashi sosai kuma yana ba da damar tsarin iska mai tsabta ya yi aiki tare da ƙarancin amfani da makamashi.
- Tsarin asali shine jikin yumbu mai siffar silinda, wanda ke amfani da sabbin kayayyaki masu girman kimiyya da siffofi na musamman. Ana yin fasahar ƙera kayan fitarwa ta hanyar harbawa mai zafi sosai.
- 1. Rufewa da maganin mold da kuma shafa mai hana danshi zai iya hana yawan zafin jiki a cikin gida da taruwar mold. 2. Sake amfani da kwayoyin ruwa daga iska, yanayin zafi mai ɗorewa. 3. Sauƙin tsaftacewa ba tare da gurɓatawa na biyu ba kuma tare da tsawon rai mai amfani.
- 1. Ana iya fitar da makamashi daga iskar gas mai fitar da hayaki don samar da iska don dumama ko sanyaya. 2. Ingancin ajiyar zafi da fitarwa shine kashi 97%, kuma musayar ta isa.
- 1. Tare da yawan shan zafi, adanawa, da kuma aikin sakinsa, a matsayin cikakken cibiyar musayar zafi, yana da aikin dawo da makamashi. 2. Yawan dawo da zafi ya kai kashi 97%.
Ana amfani da su sosai a ofisoshi, makarantu da wuraren jama'a, kuma suna dacewa da manyan wuraren samun iska. Tsarin da aka tsara yadda ya kamata zai iya tsarkake iska a cikin radius na kilomita 2.5, wanda ke nuna yuwuwar inganta iska a yankin.
A cikin masana'antu, suna haɗawa cikin tsarin iska mai tsabta na masana'antar VOCs masu yawan VOC, suna tace barbashi da kuma ruguza iskar gas mai cutarwa ta hanyar halayen catalytic, waɗanda aka yi amfani da su a cikin masana'antun sinadarai da na lantarki don sarrafa gurɓatar iska da iska mai iska biyu.
| Kadara | Babban Aluminum | Mulite | Cordierite mai yawa | Yumbu mai kauri matsakaici-alumina |
| Yawan Kayan Aiki (g/cm³) | 2.1~2.4 | 2.1~2.4 | 2.1~2.5 | 2.1~2.5 |
| Ma'aunin Faɗaɗawar Zafi (RT-800℃) (10⁻⁶·℃⁻¹) | ≤5.5 | ≤5.5 | ≤6.0 | ≤3.5 |
| Ƙarfin Zafi na Musamman (J/kg·K) | 850~1100 | 900~1150 | 900~1150 | 900~1150 |
| Tsarin watsa zafi (20-1000℃) (W/m·K) | 1.5~2.0 | 1.5~2.0 | 1.7~2.2 | 1.7~2.2 |
| Zafin Jiki na Juriyar Girgiza (℃) | ≥300 | ≥300 | ≥300 | ≥250 |
| Zafin Tausasawa (℃) | 1350 | 1450 | 1320 | 1320 |
| Shan Ruwa (%) | 15~20 | 15~20 | 4~8 | 0-2 |
| Ƙarfin Matsi (alkiblar C-axis) (MPa) | ≥20 | ≥20 | ≥20 | ≥20 |
| Ƙarfin Matsi (alkiblar A, B-axis) (MPa) | ≥4 | ≥4 | ≥4 | ≥4 |
| Girman (mm) | Girman rami (mm) | Kauri daga bangon ciki (mm) | Kauri daga bangon waje (mm) |
| 80x100 | 3-4 | 0.8-1.2 | 1-2 |
| 95x100 | 3-4 | 0.8-1.2 | 1-2 |
| 120x100 | 3-6 | 1-1.5 | 1-2 |
| 135x100 | 3-6 | 1-1.5 | 1-2 |
| 140x100 | 3-6 | 1-2 | 1.5-2 |
| 150x100-150 | 3-6 | 1-2 | 1.5-2 |
| 180x100-150 | 3-6 | 2-3 | 2-3 |
| 200x100-150 | 3-6 | 2-3 | 2-3 |
Email: alinna@bestpacking.cn
Waya/WhatsApp: +17307992122
Lokacin Saƙo: Janairu-27-2026